Hot oil boiler price list November 20, 1404
Introduction
In various industries, from food to petrochemical, providing uniform heat with high temperature is one of the basic needs of every production line. Meanwhile, hot oil boiler or hot oil boiler is known as one of the most modern methods of indirect heating. Unlike steam boilers that have high pressure, the hot oil boiler transfers heat in the range of 150 to 300 degrees Celsius using special thermal oils; without increasing the working pressure of the system.
What is a hot oil pot?
Hot oil boiler is a device for creating and circulating thermal oil at high temperature. In this system, thermal oil circulates inside the boiler coil and is heated by the burner flame. The heat transferred from the oil is transferred to the exchangers or the desired process equipment (such as dryers, heaters, reactors or raw material production devices).
The main feature of the hot oil pot is maintaining high heat without creating too much pressure; This issue has made it extremely popular among thermally sensitive industries.
Advantages of using a hot oil boiler
- High safety: Because the system does not work under high pressure, the risk of explosion or damage to the operator is greatly reduced.
- Excellent thermal efficiency: Thermal oil transfers energy with high precision and low losses.
- No need for water or steam: There are no problems such as sedimentation, corrosion or the need for hardeners in this type of boiler.
- Precise control Temperature: With the help of sensors and the control panel, the output temperature is maintained in a completely uniform and controllable way.
- Long life of the equipment: Controlled operating temperature and no high pressure significantly increase the life of the system.
- Low maintenance cost: Thermal oil is stable and does not need frequent replacement.
The main components of the hot oil system
In a complete system, there are usually the following parts:
- Hot oil boiler or main heater (in horizontal or vertical models)
- Oil circulation pump for continuous oil circulation in the system
- Open or closed expansion source To control the volume of oil during heating
- Heat exchanger or heat consumer
- Oil filters and piping lines resistant to Temperature
- Control panel and safety equipment (thermostat, pressure sensor, temperature alarm
Materials and design of hot oil boiler
For making hot oil boiler, refractory sheets with heat resistant coating and ST35.8 and ST45 standard pipes are used. The design of the internal coil is in the form of a spiral, which causes uniform circulation of oil and effective heat transfer.
In the Bakhar Niro collection, all hot oil boilers are designed and tested according to valid standards such as DIN and BS. Also, the type of burner can be selected depending on the desired fuel:
- Gas torch
- Diesel torch
- Dual burner
Application of hot oil boiler in industries
Hot oil boilers are used in a wide range of industries; Including:
- bitumen and asphalt industries
- paint and resin industry
- production of chemicals and detergents
- food industry (such as fruit dryer or vegetable oil)
- wood and MDF industries
- textile and spinning factories
In each of these applications, there is a need for high temperature without fluctuation and with precise control, which Niro Steam Hot Oil Boiler meets this need in the best way.
Factors affecting the price of hot oil boiler
The final price of the hot oil boiler on November 20, 1404 depends on the following factors:
- Thermal capacity of the device (calories or kilowatts)
- Type of fuel and burner
- Type of pipes and thickness of body sheets
- Type of controller and installed safety equipment
- Horizontal or vertical design
- Brand of used parts (torch, pump, steering panel, sensors, etc.)
Due to the constant changes in raw material and currency rates, it is recommended to contact the consulting and sales department directly to know the accurate and up-to-date price.
Receive advice and inquire about the price of the day
To get the technical details, choose the right capacity, and inquire about the updated price of the hot oil boiler for your factory or workshop, just contact Bokar Niro experts:
Bokar Niro's technical team is ready to guide you in choosing the right model, and provide free hot oil system design consultation.
The hot oil boiler is an ideal choice for heat control in industrial systems; A device with high efficiency, high safety, and very low maintenance cost. If you are looking for a durable and economical solution to heat the production line, Niro steam products are a reliable option in the field of hot oil boilers.
In order to know the exact price of the hot oil boiler on November 20, 1404 and to receive expert design and selection advice, call the following number today: