Oil Heater Heater Factory - Mashhad Steam Company
Introduction
In the bitumen production industry, maintaining a sustainable and sustainable temperature in all stages of processing and transfer is very important to ensure the final quality of the product. One of the key equipment that makes this process with high efficiency is Oil Heater Heater . Mashhad's Steam Company , with over two decades of experience and implementation of hundreds of successful industrial projects throughout Iran, is the most prestigious manufacturer of bitumen heaters.
In this full article, in addition to the technical introduction of the Oil Heater, we will address the applications, benefits, structure and factors affecting its price and review the essentials of installation and maintenance. Frequently asked questions at the end of the article answers the important ambiguities of buyers in order to facilitate your purchase decision.
Structure of the article
1. What is Oil Heater and why is it important in the bitumen factory?
Oil Heater, or Industrial Oil Heater, is a high heat transfer system whose main task is to indirectly heat up high fluid and viscose, including bitumen. The presence of these heaters in bitumen processing and storage lines ensures quality and ability to pump and prevent bitumen and destroy the bitumen.
Why is Oil Heater vital for bitumen?
- bitumen is not pumped at temperatures below 120 degrees Celsius.
- indirect heat impedes the oxidation and chemical change.
- Improvement and reduced fuel consumption costs.
- Extension of factory equipment.
2. Introducing Mashhad Niroo Steam Company and Industrial Credit
Mashhad Steam Company, with European -based technology and over 20 years of engineering experience, is one of the pioneers of the thermal equipment and thermofloid industry in Iran.
Credit Indicators:
- Implementation of more than 5 bitumen and refinery projects across the country
- Receive ISO 9001 certification and certificates, CE Europe and National Iranian Standard
- Advanced product lines with multi -stage safety test and top support services
Some Indicable Customers:
Imam Khomeini Oil Refinery, Eastern bitumen companies, road bitumen manufacturers across Iran
1. The technical structure and key parts of the Evil Heater Bitumen
Evil Heathears of the Bitumen Power Company are a smart combination of high quality technology and raw materials and are mainly made from the following parts:
A) hot oil boiler (Hot Oil Boiler)
- Made of corrosion -resistant steel alloy up to 2 degrees
- Spiral design for uniform heat distribution
- Boiler volume tailored to production line capacity
B) Industrial Torch
- Gas Burner, Dual Burner or Dual Burner, Fully Automatic
- Smart Air and Fuel Setting Smart Consumption
C) Piping and heat exchanger system
- Special alloy pipes for transferring heat oil
- Converter installation for heat distribution in tanks and bitumen lines
D) Powerboard and Central Control System
- Monitoring Oil and Bitumen Temperature
- Automatic Protection against Overload & Leak
E) Sensors and Safety Systems
- Equipped with Floo Monitor, Temperature Sensor, Pressure
- Emergency System
1. How the heat transfer mechanism and mechanism
In the steam heater heater, the heat is transferred to the thermal oil by the torch, and then the heat reaches the bitumen and the bitumen, holding the bitumen in the temperature range of 0 to 2 ° C.
Important features of the mechanism:
- Temperature uniformity throughout the system due to forced oil circulation
- Reduce solution oxygen and prevent sudden evaporation of bitumen
- Special design to prevent hot spots and topical burns
1. The benefits and added value of steam products
A) higher efficiency than world standards:
- The thermal waste of less than 1 % (run based on EN15378)
- Electronic Step Electronic Control
B) Low fuel consumption:
- Average reduction of 1 to 2 % fuel consumption compared to old samples
C) Longevity and Unrivaled Safety:
- Use anti -corrosion and multilayer safety material
- Alarms and Automatic Disconnecting System for Operator and Equipment Protection
D) after -sales service and supply of parts:
- Large Service and Spare Parts Network across Iran
- Free Installation Training for Buyer Technical Personnel
1. Installation and maintenance standards
a) Important Installation Tips:
- Installation of the device on a fully aligned chassis
- Observing the safety gap with the wall and combustible equipment
- Basic Chimney and Ventilation for Torch Performance
b) Periodic Maintenance and Service:
- Monthly Review of Oil Temperature and Pressure
- Washing Lines and Valves every 6 months
- Replacement of thermal oil every 2 to 6 months (depending on the quality of the oil and the operation time)
1. Complete review of the price factors of the Evil Heater
Price of Evil Heater Factory depends on a few main factors:
Note:
accurate and up -to -date prices can only be asked after the production line capacity and selection of fuel type from the sale of the Niroo Steam Company. For consultation and price inquiry, just contact the sales department.
1. Frequently Asked Questions (FAQ)
1. What is the difference between the Evil Heater and the Boiler? The boiler works with water vapor that is not suitable for bitumen because it causes moisture and quality loss.
1. Is Evil Heater Heater for 6 -hour launch and continuous work?
1. What happens if there is a power outage or fluctuation?
1. How different is the efficiency of the winter device?
due to the design of specific thermal insulation and automatic temperature control, the efficiency drop is very minor and does not have the common problems of the weak devices.
1. Conclusion and final recommendation
If you are looking for a low -powered, low -income device, with real warranty and support for your bitumen production line, Mashhad's steam products are the best internal option. Careful selection of capacity and standards of installation doubles the life of the system.
For advice and purchase, simply contact the experts of Steam Company and declare the exact need to deliver the best heaters with price guarantee and quality.
SEO Keywords:
Buy Evil Heater, Evil Heater Industrial Price , Evil Heater Repair, Sale of Evil Heater Mashhad Factory, 
مطالبی که در این پست مطالعه میکنید
Oil Heater Heater Factory - Mashhad Steam Company
Introduction
Structure of the article
1. What is Oil Heater and why is it important in the bitumen factory?
2. Introducing Mashhad Niroo Steam Company and Industrial Credit
1. The technical structure and key parts of the Evil Heater Bitumen
1. How the heat transfer mechanism and mechanism
1. The benefits and added value of steam products
1. Installation and maintenance standards
1. Complete review of the price factors of the Evil Heater
1. Frequently Asked Questions (FAQ)
1. Conclusion and final recommendation

