Boiler components

The main body of the boiler Furnace (fireplace) boiler smoke pipes (pass two) smoke pipes (pass three) combustion chamber smoke room Back smoke room chassis shell torch feed pump Inlet water supply Steam outlet valve Safety valve Control tube Single stroke drain valve Instrument set pressure switch Manometer

Steam boilers, apart from the ones mentioned above, need other requirements, some of which are mentioned below. Economizer: Economizer is used as heat recovery and feed water preheating to increase boiler efficiency and reduce device corrosion caused by low temperatures. Superheater: Superheaters are used to increase the temperature of steam coming out of the boiler and increase efficiency. Hardener: Hardener is used to separate two elements calcium and magnesium from boiler feed water. If these two elements are not separated from the feed water, something similar to the depositing of the kettle in the body and tubes of the boiler will occur. Deaerator: To prevent the corrosion process of steam boilers, boiler water must be alkaline and reducing. To ensure this issue, oxygens dissolved in the feed water of the boiler should be removed through the deaerator.

As you know, the use and application of the boiler is diverse. For example, small boilers are used to disinfect sheets and blankets in the lingerie department of hotels and hospitals, or to clean and disinfect clothes in dry cleaners. If steam is used as a source of power production, steam can be used in the oil and gas industry, especially in the feed line of power plant steam turbines. Here are some of the common applications and uses of steam in industries. Food industry printing industry Beverage industry chemical industry Pharmaceutical industry And...

Steam boilers have a wide range of advantages, below are some of them: The variety in the capacity, type and working pressure of this equipment has made it possible for you to order it in the required capacity. The steel material of the device increases its efficiency and lifespan. Fuel combustion efficiency in steel boilers is higher than cast iron. A variety of consumable fuels can be used for the combustion of steam boilers. Steam boilers have the ability to withstand high pressures. and ....